Pressure Transducers HD Type HD Pressure Transducers are Industrial quality low cost sensors designed with hydraulics in mind. Utilising the very latest thin film technology the units are designed for ten million cycle peak to peak performance. Standard accuracy is ±0.5% (of full scale), a stable transducer with extremely low calibration drift (0.2% per year). All stainless steel construction. NAMAS Calibration certificate available. Connection is via 1/4" BSP male thread with viton elastomer face seal as standard. 4 - 20 mA 0 - 10 VDC Pressure range Part number Part Number 0 - 60 3403-21-A4.37 3403-21-A4.39 0 - 200 3403-10-A4.37 3403-10-A4.39 0 - 400 3403-15-A4.37 3403-15-A4.39 0 - 600 3403-18-A4.37 3403-18-A4.39 PR15 Calibrated type PR15 Series Pressure Transducers are the sensors of choice for accurate hydraulic applications. The extremely durable / rugged piezoresistive membrane sensors are accurate to ±0.5% full scale (±0.1% when the provided linearization tables are used). Pressure readings are obtained from the hydraulic system (during operation) from any standard MINIMESS® coupling by using a gauge adaptor. These sensors are constructed from all stainless steel and injected with foam to protect internal parts. PR15s are supplied with calibration sheets for linearization use to increase accuracy to ±0.1% All transducers are tapped 1/4" BSP 4 - 20 mA 0 - 20 mA Pressure Range Part number Part number -1 - 6 3403-32-71.37 3403-32-71.33 0 - 60 3403-21-71.37 3403-21-71.33 0 - 200 3403-10-71.37 3403-10-71.33 0 - 400 3403-15-71.37 3403-15-71.33 0 - 600 3403-18-71.37 3403-18-71.33 0 - 1000 3403-29-71.37 3403-29-71.33 This site and all photography and illustrations are the copyright of Flowtechnik, a division of Hydrotechnik UK Limited © 2004